Advanced hardware architecture design, rich combination design -HT3600 core frame switch management module and service module integration, any service module can be inserted into slot 1 as a management module, no longer need to configure a separate management module. Modular design, high-density
Description Parameter Application2x10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps/10Mbps RJ45 ports ensure faster transmission Complies with IEEE802.3af/at/bt standards,Supplies PoE (15.4W), PoE+ (30W), or PoE++ 60W/90W Reduces infrastructure costs by transmitting data and power simultaneously via an Ethernet cable Automatically determines
Description Parameter Application● MPO to MPO, 12-core ● MPO Female (without pin) ● MMF, OM4 (50/125μm) ● POLARITY B ● Polish: APC ● Cable OD: Φ3.0mm ● LSZH Jacket
Description Parameter Application◆ Provides 8 physically isolated 1000M Ethernet channels at line speed, with 10G optical port bandwidth and 8 Gigabit Ethernet ports fully isolated; ◆ Supports either dual Gigabit or dual 100Mbps rates, but does not support asymmetric communication (e.g., 100Mbps on one end and Gigabit on the other
Description Parameter ApplicationMaximum split ratio of 1:128, connecting up to 2048 ONTs Rich Layer 2/3 switching features, flexible management methods Comply with ITU-TG.984/G.988 standard Support FlexLink, STP, RSTP, MSTP, ERPS, LACP, ACL, QoS Support 64K MAC address Support RIP、OSPF、BGP、ISIS and IPV6 Support ONU authentic
Description Parameter Application32*40G/100G Base-X QSFP28 Supports combining the processing power of multiple switches into a single logical device Stacking support simplifies the management process. Administrators only need to manage one logical device. High-density 100G fibre access Provides superior high-bandwidth
Description Parameter ApplicationWater-proof design with IP-65 Protection Level Integrated with flap-up splice cassette and adaptor holder All stainless metal plate and anti-rusting bolts, nuts Fiber bend radius control more than 40mm Suitable for the fusion splicer or mechanical splice 2Pcs of 1x8 Splitter can be installed as
Description Parameter ApplicationProvide 1-2-way serial port, each serial port at the same time to provide RS232/422/485 three kinds of serial interfaces (interface type can be set through the DIP switch), to facilitate the opening of the business on the spot;; Can automatically detect and control the RS-485 data flow It is not ne
Description Parameter Application▪ Long production history, more popular process, stable low tap performance, low insertion loss and polarisation related loss; ▪ High reliability, high directionality, high operating temperature; ▪ Single or double window, and triple window according to customer needs; ▪ D
Description Parameter ApplicationCompliant with QSFP-DD/QSFP28 MSA Standard Compliant with IEEE 802.3bj (100GBASE-CR4) Standard Compliant with IEEE 802.3by (25 Ethernet) Standard Data Rate:28G NRZ Per Channel Total Bandwidth 100 Gbps (4 Lane 28G NRZ) Low Power Consumption Management Interface follows SFF-8636 Standard and can
Description Parameter ApplicationAdopt snap type opening method, easy to open. There are two 20mm cable inlet ports at the back, and equipped with cable protection rubber ring, fiber optic cable compression and reinforcement core fixing device. High-quality cold-rolled steel molding Electrostatic spraying is even and flat Compl
Description Parameter ApplicationAdopt high-quality photoelectric integrated module to provide good Fiber and electrical characteristics Ensure reliable data transmission, long working span life Support full-duplex or half-duplex mode, with auto-negotiation capability The network port supports automatic cross recognition Built-
Description Parameter Application