In hot-swappable OSFP package Full-duplex active fiber optic cable Eight channels of 106.25Gb/s PAM4 modulation 850nm VCSEL laser and PIN photodetector Compliant with IEE802.3ck, OSFP MSA and 800G Ethernet standards RoHS compliant (lead-free) Meets EML, ESD requirements Meets Telcordia (Bellc

Support line rates from 103.125 Gb/s to 112.2 Gb/s OTU4 Built-in 4-channel Clock and Data Recovery (CDR) in TX and RX LAN WDM EML laser and PIN receiver with SOA Up to 80km reach for G.652 SMF Hot pluggable 38 pin electrical interface QSFP28 MSA compliant BIDI LC optical receptacle RoHS-10 co

Supports 100GBASE-LR1-20 BIDI Lane signaling rate 106.25Gb/s with PAM4 Up to 40km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface I2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA packag

Supports 100GBASE-LR1-20 BIDI Lane signaling rate 106.25Gb/s with PAM4 Up to 20km transmission on SMF EML Laser and PIN receiver 4x25.78Gb/s with NRZ electrical interface (CAUI-4) High speed I/O electrical interface I2C interface with integrated Digital Diagnostic monitoring QSFP28 MSA packag

High-speed performance with a lane signaling rate of 106.25Gb/s with PAM4 4×25.78Gb/s NRZ electrical interface (CAUI-4) for seamless high-speed data transfer Supports up to 10km transmission on Single Mode Fiber (SMF) Equipped with an EML Laser and PIN receiver for superior performance Integrate

Compliant to the 40GbE XLPPI electrical specification per IEEE 802.3ba-2010 Compliant to QSFP+ SFF-8436 Specification Operates at 10.3125 Gbps per electrical channel with 64b/66b encoded data QSFP MSA compliant Capable of over 100m transmission on OM3 Multimode Fiber (MMF) and 150m on OM4 MMF S

Max. Power Consumption 1.5W Without Module Use SFP28 in QSFP28 Port of Your Device Tested in Targeted Switches for Superior Performance, Quality, and Reliability Works out of the Box, No Configuration Needed Extended Temperature Range -20°C to 85°C FS BOX - Support Real-time Configuration Hot

Supports 100GBASE 100GE Lane bit rate 25.78 Gb/s 100GE Up to 100km transmission on SMF; LAN WDM laser and PIN receiver with SOA; Support Multi-Pin function with IntL/RxLOSL and LPMode/TxDIS; High speed I/O electrical interface (CAUI-4); Single +3.3V power supply; Typical power consumption 6.5

Use SFP+ in QSFP+ Port of Your Device Tested in Targeted Switches for Superior Performance, Quality, and Reliability Works out of the Box, No Configuration Needed Low Insertion Loss High-Speed Electrical Interface Compliant to IEEE 802.3ba Compliant to SFF-8436 and QSFP MSA Hot Pluggable QSFP+

Compatible with the QSFP28 MSA as described in SFF-8665 100Gb/s over 2 wavelengths on a 50 GHz DWDM grid enabling 4Tb/s over a single fiber PAM4 modulation format enabling 56Gb/s on a single wavelength 80km reach over a duplex, SMF Integrated, high-gain FEC encode / decode Advanced ADC/DSP rece

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x uncooled CWDM DFB lasers and APD ROSA Compliant with QSFP MSA, IEEE 802.3bm 40GBASE-ER4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 40km over SMF Power consumption < 3.5W Duplex LC receptacles Operating case t

Hot-pluggable QSFP-DD form factor 8 channels full-duplex transceiver modules Transmission data rate up to 53Gbps per channel 8x53Gbps PAM4 transmitter and PAM4 receiver 8 channels 850nm VCSEL array 8 channels PIN photo detector array Internal CDR circuits on both receiver and transmitter