Choice of SC, ST or LC connector for multimode and single mode DIP switch configuration for link fault signalling and fiber auto/force mode Support LFP (Link Fault Pass-through) Function Supports packet length up to 1600bytes Supports operating temperature range -10°C to 60°C Built-in surge pro

• 3R Repeater • Support Jumbo Frame • Transparent Transport and very low delay • Support ITUT prescribed DWDM/CWDM wavelength • Support DMI function for SFP+/XFP fiber module • Support PRBS31 Pattern Generator and Checker function • Support hot pluggi

US/EU/UK/CN/AU/JP style optional 5V1A,5V2A,5V3A optional 100% tested, pass CCC/CQC certification

Optical port rate: supporting 2Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps; SFP slot design, optical modules can be configured according to actual needs Emission wavelength: support the WDM wavelength specified by ITU-T; Transparent access: support flexible and transparent access to services such a

• 10G/5G/2.5G/1G/100M Copper to 10GBASE-X SFP+ Media Converter SPOTLIGHT • Comply with IEEE802.3an/ae standard • Copper port 155M/1/25G/2.5G/5G/10G auto-negoiation,Optical port support downward compatible with 5G/2.5G/1.25G/155M optical module • Supporting full-duplex/hal

· Protocol supported: IEEE802.3z 100BASE-SX/LX · Supporting full-duplex and half-duplex network communications; · Capable of mutual conversion between 850nm multi-mode fiber and 1310nm/1550nm single-mode fiber; · Support max speed of 1.25Gbps · Fiber port support SC、FC、ST、LC · Supporting direct

Product Features: Modular rack design with a flexible structure, sixteen slot 2U chassis Master-slave architecture, providing management modules (master and slave), up to four chassis can be cascaded for management Supports display and configuration of complete system information Port speed limi

■Protocol: IEEE802.3u 100BASE-FX ■Support full duplex and half-duplex network communication, with auto-negotiation capability; ■Capable of mutual conversion between 850nm/1310 multi-mode fibers and 1310nm/1550nm single-mode fibers ■support direct and transparent transmission of packets in diffe

Physical Port One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function One 10GBASE-X SFP+ slot interface Layer 2 Features IEEE 802.3u/802.3ab/802.3bz/802.3ae Ethernet standard compliant Supports auto-negotiation and 100Mbps half/full duplex and 1/2.5/5/10Gbps full duplex mode

SPOTLIGHT • Comply with IEEE802.3an/ae standard • 10G Base-T to 10G Base-R SFP+ or XFP conversion • Supporting full-duplex/half-duplex working mode with automatic negotiation function • Direct/Cross Automatic Identification of Supporting Cables • Supporting Loopbac

• Accommodates up to 16 media converters operating under different protocols • Supports two load sharing, hot swappable power supplies • Two serviceable high volume cooling fans • LED status panel with fan and slot and power LED • Supports slot power isolation R

PCI-Express host interface specification v3.0 x8 and higher Supports the PCI Bus Power Management specification and section 5 of the PCI Express Base Specification PCI-Express lanes: x8 Quad-port 10GbE adapters Network Virtualization offloads including VXLAN, NVGRE, Geneve and Network Service H