Compliant with IEEE802.3, 802.3u, 802.3x standards Supports full duplex/half duplex, MDI/MDI-X auto-detection Shell-less embedded design, can be embedded into the circuit board as a switching module, or can be used as a switch alone. Intrinsically safe and explosion-proof, can be used in coal min

- System structure: integrated embedded structure; - Video acquisition: hardware acquisition mode - Video input interface: 1 * DVI / HDMI (4K) / VGA / YPbPr / CVBS, 1 * 3G-SDI / SDI / HD-SDI - Input resolution: HDMI 4k(3840x2160),VGA/HDMI/DVI 640x480 ~ 1920x1200,HD-SDI 1080P60, - Audio Input Int

◆Physical Ports: 24 100Mbps optical + 4 Gigabit (Combo) optical multiplexing ports. ◆ Switching capacity: 256Gbps, forwarding rate: 96Mpps. ◆ Software function: support QoS, VLAN, DHCP, LACP, RMON, IGMP, IPv6 protocol; ◆ Device Management: Support SNMP, Console, Telnet and WEB configuration manag

Applied to 4-24 core SM or MM fiber connection Two-piece type adapter can be customized opposed （UP-DOWN）key and aligned(UP-UP) key Two-piece type adapter can be customized plastic housing and metal housing One-piece type adapter is stable opposed(UP-DOWN) key Plastic housing can be customized b

➢Ultra-compact size (78*27*18mm) and super light weight (50 g) ➢10/100/1000Base-T to 1000Base-X ➢SFP slot for flexible long distance transmission ➢Type-C powered for easy portability or used with the included power adaptor ➢Auto-negotiation ➢Auto-MDI/MD

√Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3afPower over Ethernet standards √Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function on copper port √IEEE 802.3x full duplex flow control and back pressure in half duplex elim

Industrial DIN-rail design, designed for harsh and demanding industrial environments. The device provides 1 gigabit Ethernet port + 1 RS232/422/485 to 1 gigabit SFP optical interface, the transmission bandwidth of line speed 1000M. The switch has a built-in 1Mbit MP-SSRAM high-speed memory, non-bl

Optical port rate of 1.25G, electrical port rate of 10/100/1000M adaptive, full/half-duplex communication mode adaptive. 1K capacity MAC addresses can be stored and automatically updated. Broadcast storm protection The ***maximum rate of data transmission (line rate) is 1488000 fps, 148800 fps, 1

Hot-pluggable SFP28 form factor Full-duplex transceiver module 850nm VCSEL and PIN photo-detector Compliant with SFP28 MSA and IEEE 802.3by 25GBASE-SR Data rate up to 25.78125Gbps Reach up to 70m (OM3) or 100m (OM4) over MMF Power consumption < 1W Dual LC receptacles Operating case