45MHz to 1002MHz frequency bandwidth; Built-in optical AGC control circuit to ensure stable output level Adoption of high-efficiency switching power adapter, wide voltage adaptation range; Ultra-low current, ultra-low power consumption; Optical power alarm adopts LED indicator display;

Fully compatible with 5G/4G/3G/2G network, support VPN and DNS. Adopt high-performance industrial-grade communication module, dual-core 880MHZ CPU, 128M/256M memory. Operating temperature:-35~75 degrees Voltage input: dual power input 12~56V DC Aluminum alloy shell, adapt to various outdoor envi

PCI-Express host interface specification v3.0 x8 and higher Supports the PCI Bus Power Management specification and section 5 of the PCI Express Base Specification PCI-Express lanes: x8 Quad-port 10GbE adapters Network Virtualization offloads including VXLAN, NVGRE, Geneve and Network Service H

Supports up to 25.78Gbps bit rates Hot-pluggable SFP+ footprint 850nm VCSEL laser and PIN photodiode 300m over 50/125 um OM4 200m over 50/125um OM3 Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monit

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

Physical Port One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function One 10GBASE-X SFP+ slot interface Layer 2 Features IEEE 802.3u/802.3ab/802.3bz/802.3ae Ethernet standard compliant Supports auto-negotiation and 100Mbps half/full duplex and 1/2.5/5/10Gbps full duplex mode

Supports 850Gbps Single 3.3V Power Supply Power dissipation < 15W 8x53.125GBd (PAM4) Electrical Interface MPO-16 Connector APC Case Temperature Range: 0°C to 70°C VCSEL Transmitter PIN and TIA Array on the Receiver Side I2C Interface with Integrated Digital Diagnostic Monitoring Safety Cert

Supports 206.25Gb/s(8x NRZ 25.78125Gbps) aggregate bit rate Reach up to 70m (OM3) or 100m (OM4) over MMF 8x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Single MPO-16 receptacle Compliant with QSFP-DD MSA, IEEE 802.3bm 100GBASE-S

Hot-pluggable QSFP-DD form factor Supports 103.1 Gb/s aggregate bit rates Power dissipation < 8W RoHS-6 compliant (lead-free) Commercial case temperature range 0°C to 70°C Single 3.3V power supply Maximum link length of 100m on multimode Fiber (MMF) with FEC MPO receptacles I2C management in

1. The fiber fixation and protection function: Fiber inlet, fixation, and protection device should be provided. The fibers will be protected from being damaged when they are let in and fixed in the frame through these devices. The metal parts of the cables are insulated from the machine. The metal

•4*1G/2.5G/10G SFP+ slots uplink，16*10/100/1000Base-T+ 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE po

·Water-proof design with IP-65 Protection Level ·Integrated with splice cassette and cable management system ·Manage fiber in a reasonable fiber radius condition ·Easy to maintain and extend the capacity ·Fiber bend radius control more than 40mm ·Suitable for the fusion splice or mechanical spl