● Up to 11.1Gb/s data links ● Up to 80Km transmission on SMF ● 1270nm/1490nm DFB Laser and APD receiver 1330nm/1550nm DFB Laser and APD receiver ● EEPROM with serial ID Functionality ● 2-wire interface with integrated Digital Diagnostic monitoring ● Hot-pluggable SFP+ footprint ● Specifi

1.Suitable for ordinary fiber and ribbon fiber. 2.Fully kitted with all parts for convenient operation. 3.Overlap structure in splicing tray for easy installation. 4.Fiber-bending radium guaranteed more than 40mm. 5.Easy to install and re-entry with a common can wrench. 6.Excellent Anti-removab

Tight sleeve optical fiber is used for easy stripping Tight fiber has good flame retardant performance The aramid reinforced elements make the optical cable have excellent tensile properties The Figure-8 structure sheath is easy to strip and use The external protection material has the advantage

PLC splitter MINI module has excellent performance parameters The PLC splitter is insensitive to wavelength and has full-band signal transmission from 1260 to 1650 nm. The PLC splitter has lower channel uniformity, ensuring that each channel can be reach almost the same when distributing optical p

Low Insertion Loss High isolation Low Polarization Dependent Loss Compact design Wide operating wavelength range High reliability and high stability Telcordia GR-1209-CORE-2001 compliant Telcordia GR-1221-CORE-1999 compliant ITU-T G.694.2 compliant RoHS-6 compliant (lead free)

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

Hot-pluggable SFP28 form factor Full-duplex transceiver module 1310nm DFB laser and PIN photo-detector Compliant with SFP28 MSA and IEEE 802.3cc 25GBASE-LR Data rate up to 25.78125Gbps Reach up to 10km over SMF Power consumption < 1.5W Dual LC receptacles Operating case temperature

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Compliant with QSFP MSA, IEEE 802.3ba 40GBASE-SR4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 300m (OM3) or 400m (OM4) over MMF Power consumption < 1.5W MPO12 rece

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x 1310nm DFB lasers and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Supports CDR bypass Compliant with QSFP28 MSA and 100G PSM4 MSA Data rate up to 103.125Gbps Reach up to

Universal AC input/ full range Protections: Short circuit/ Over load/ Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 isolation class 2 LED indicator for power on 100% full load burn-in test 2 year warranty

- Up to 15.4/30W of PoE Power - IEEE 802.3af Compliant - Safe on Low Power Devices Receive Only the Power They Need - Safe and Reliable Power to WLAN Access Points - Automatic Detection and Protection of Non–standard Ethernet Terminals - Supports 10/100/1000Base-T LAN environment - Uniq

* 8/10 bit digital sampling * 8B/10B Coding Technology * Perfect compatibility with Hikvison TVI, Dahua CVI and Xiongmai AHD 2MP HD cameras * High-speed synchronous digital transmission technology, data card can be configured optionally. * Super Optical Dynamic Range, Used without Adjustment *