Supports GPON/XGS-PON/NGPON2 standards with transmission rates up to 9.953 Gb/s. Supports transmission distance up to 20 kilometers, suitable for WAN deployment. Power consumption is less than 2.5W, supporting long time stable operation. Temperature range of -40°C to 85°C, highly adaptable to mee

Data Rate: Up to 800 Gbps Interface Type: OSFP Transmission Distance: 30m@OM3, 50m@OM4 MMF Wavelength: 850nm x 8 lanes Dual MPO-12 receptacles, of each connecting 12 cores parallel MMF 8x106.25Gbps (53.125GBd PAM4) electrical interface 8x106.25Gbps (53.125GBd PAM4) optics architecture Power

45MHz to 1002MHz frequency bandwidth; Built-in optical AGC control circuit to ensure stable output level; Adoption of high-efficiency switching power adapter with wide voltage adaptation range; Ultra-low current, ultra-low power consumption; Optical power alarm using LED indicator display; Buil

-Supports GPON and EPON auto detection -Support Rogue ONT detection -Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode -Support NAT, Firewall function. -Support Internet, IPTV services automatically bound to ONT ports -Support Virtual server, DMZ, and DDNS, UPnP -Support Filterin

QSFP-DD MSA compliant Compliant to 400G FR4 specification in 100G Lambda MSA 4 CWDM lanes MUX/DEMUX design 8x53.125Gb/s PAM4 electrical interface (400GAUI-8) Maximum power consumption 12W LC duplex connector Up to 2km transmission on single mode fiber with FEC Operating case temperature: 0℃~7

Precision connection with sleeve SM and MM connector can be used interchangeably Low insertion loss，High return loss High interchangeability, High reliability, Compliance with IEC and ROHS standards High precision of mechanical dimensions Stable&reliable performance

•4*1G/2.5G/10G SFP+ slots uplink，16*1G SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE ports,

Simultaneous cable feed x 2, compatible with ST/FC/SC/LC adapters Cold tie plate + surface electrostatic spraying. Desktop and wall-mounted installation Snap-on top cover design, one push to open and close, easy and fast installation Small size, light weight, easy to install and maintain

● 1*10/100/1000Base-T RJ45 PoE port, 1*100/1000Base-X SFP(/SC/ST/FC optional) fiber port ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ standard ● DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection ● Complies with IEEE802.3af PoE and IEEE802.3at PoE+ stand

ABS material ensures strong body and light weight. Protection Level: IP55. Water-proof design for outdoor uses, lock provided for extra security. Easy installations: Ready for wall mount，installation kits provided. Adjustable adapter slot used – to suit different size pigtails. Space savin

* Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1Q, 10Base-TX, 100Base-TX, 1000Base-TX, 1000Base-FX standards. * Support TCP / IP, PPPOE, DHCP, ICMP, NAT protocol. * Flow control: Full duplex using IEEE 802.3X, a standard half-duplex adopt Backpressure. * Electrical ports support aut

Support the highest resolution of 4k2k @ 60Hz (yuv444); Support the highest resolution of HDTV up to 4K; Support hdmi2.0 interface, compatible with hdmi1.4 standard LC interface is adopted for optical fiber, which can be hot plugged on site; One core single-mode fiber is used; The device suppor