• Supporting Two 10/100/1000M copper and one 1000M Optical Port • Optical port SC/ST/FC optional and distance 2~120km optional • Optional 24V/220V power input • Industrial IP40 Protection grade • Support Din-rail and wall-mount installation

• All-digital, uncompressed high-definition optical fiber transmission • LC interface, can plug out the sick code SFP optical module, transmission distance is optional • 1U rack type • With 1 Reverse RS485 Data • Clock Recovery, Clock Shaping • Pass Pathologi

•Four-channel full-duplex transceiver module • Hot Pluggable QSFP+ form factor • Maximum link length of 100m on OM3 Multimode Fiber (MMF) and 150m on OM4 MMF • Multirate capability: 1.06Gb/s to 10.5Gb/s per channel • Unretimed XLPPI electrical interface •

Support H.265 Technology; Distance up to 150m over a CAT6 cable. Video resolution max up to 3840*2160@30Hz. Support one to many receivers transmit (253pcs RX over Ethernet switch) Support IR(38khz)signal pass back control. Support HDMI 1.4 and HDCP 1.4protocol; Have a HDMI local output in Send

-Supports GPON and EPON auto detection -Support Rogue ONT detection -Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode -Support NAT, Firewall function. -Support Internet, IPTV and CATV services automatically bound to ONT ports -Support Virtual server, DMZ, and DDNS, UPnP -Support

*Provides 5/8 10/100/1000M adaptive RJ45 ports *Industrial grade operating temperature: -40°C~85°C *Wide voltage input: 12V~52VDC *Compact body, better adapted to industrial environments *IP30 protection *Three-proof paint coating protection, enhance the reliability of industrial-grade products

Adopt snap type opening method, easy to open. There are two 15mm cable inlet ports at the back, and equipped with cable protection rubber ring, fiber optic cable compression and reinforcement core fixing device. High-quality cold-rolled steel molding Electrostatic spraying is even and flat Compl

Adopt high-quality photoelectric integrated module to provide good Fiber and electrical characteristics Ensure reliable data transmission, long working span life Support full-duplex or half-duplex mode, with auto-negotiation capability The network port supports automatic cross recognition Built-

Product Features: Modular rack design with a flexible structure, sixteen slot 2U chassis Master-slave architecture, providing management modules (master and slave), up to four chassis can be cascaded for management Supports display and configuration of complete system information Port speed limi

-Based on Home Plug AV, IEEE P1901 protocol. -Following IEEE 802.3 protocol, fully compatible with network equipment of any manufacturer; -Maximum physical rate of 200 Mbps; -Maximum real-time rate of 70-80Mbps; -Supports 2-core cable, coaxial cable, up to 600 meters; -Built-in hardware watchdo

200 Gigabit Ethernet (212.5 Gbit/s) Transceiver Aggregate data rate of 212.5 Gbit/s Optical Interface: Compliant to 26.5625 GBd PAM4 x 4 CWDM wavelength 200GBASE-FR4 Electrical Interface: Compliant to 26.5625 GBd PAM4 x 4 lane 200GAUI-4 Reach: Up to 2 km over duplex single mode fiber Form Facto

- Provide protection for optical cable distribution, which is waterproof and dustproof; - Independent Optical Fiber I splice area, adapter connection area and cable wiring parking area, easy to operate and maintain; - The box body is upper and low structure. After open it can be operated on both s