8x100/1000Base-T and 1 x 10G Base-X SFP optical ports 8 physically isolated 1000Mbps full-duplex RJ45 ports with 1Gbit/s bandwidth on a single port Fibre optic module supports hot-swapping DC 5-16V input Good EMC/EMI performance ensures stable operation in complex electromagnetic environment

Easy to put the fiber terminal box inside Easy to install on the ground Provides mechanical and environmental protection of splice and cable storage areas Constructed of non-metallic HDPE to resist rust, corrosion, and impact.

Water-proof design with IP-65 Protection Level.

• Low insertion loss • High back reflection loss • Rated OM5 to offer a wideband 50/125 multimode fiber solution • Provides an upgrade path from 40 Gbps to 100 Gbps and beyond • Backward compatible with OM3 and OM4 applications • Low-Smoke, Zero Halogen (LSZH

There are two 20mm cable inlet ports at the back, and equipped with cable protection rubber ring, fiber optic cable compression and reinforcement core fixing device. High-quality cold-rolled steel molding Electrostatic spraying is even and flat Comply with ROHS certification standards Comply wit

Fully compliant with ITU-T G.984/G.987/G.988/G.9807 standards, with good interoperability GPON/XG-PON/XGS-PON multi-service unified platform for subsequent network upgrades and technology evolution. Dual master control, dual power redundancy, PON backbone fiber protection to ensure service continu

1, 4*Copper port 10/100Base/1000T auto-negotiation (RJ45 interface); 2, Transmission distance: multimode up to 550m, singlemode up to 100km; 3, Transmits 1 Bi-directional half duplex 485 signal; 4, support IEEE802.3, IEEE802.3u, IEEE802.3x network standards; 5, store-and-forward switching mode;

Duplex LC receptacle optical interface Single +3.3V power supply Transmitter: Cooled LAN-WDM DML TOSA Receiver: LAN-WDM PIN ROSA Optical Interface: 26.5625 GBd PAM4 x 4 wavelength Electrical Interface: 26.5625 GBd PAM4 x 4 lane 200GAUI-4 Operating case temperature range: 0℃ to 70℃ Power

-RTL chipset -Dual mode ONU,can detect and exchange PON mode automatically -Bridging and routing modes can be set -Gigabit WiFi6 2.4GHz & 5GHz Dual Band Speed up to 1.8 Gbps -2.5Gb RJ45 connector for higher bandwidth transmission, such as connecting to a WiFi6 router -USB3.0 Interface for Share

• IEEE 802.3af/at power on the POE port • Auto-negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex • The UTP port supports the connection of MDI/MDI-X auto crossover • Gigabit Open SFP slot to customize the network extension dis

•4*1G/2.5G/10G SFP+ slots uplink，16*1G SFP ports + 8*1G SFP/RJ45 COMBO ports downlink, 1* RJ45 console interface for switch basic management and setup •Layer 3 routing features: Supports static and dynamic routing, RIP, OSPF, BGP4,ECMP, VRRP •Port aggregation: Supports GE ports,

Features ●Low insertion loss ●Good interchangeability and pluggability ●Compliant with ROHS requirements ●Wide range of MPO practices ●High quality inserts with precise PIN pin alignment ●Drawings are available, MTP can be provided ●Telcordia GR-326RCORE standard