• 3R Repeater • Support Jumbo Frame • Transparent Transport and very low delay • Support ITUT prescribed DWDM/CWDM wavelength • Support DMI function for SFP+/XFP fiber module • Support PRBS31 Pattern Generator and Checker function • Support hot pluggi

◆ Provides 8 physically isolated 1000M Ethernet channels at line speed, with 10G optical port bandwidth and 8 Gigabit Ethernet ports fully isolated; ◆ Supports either dual Gigabit or dual 100Mbps rates, but does not support asymmetric communication (e.g., 100Mbps on one end and Gigabit on the other

Maximum split ratio of 1:128, connecting up to 2048 ONTs Rich Layer 2/3 switching features, flexible management methods Comply with ITU-TG.984/G.988 standard Support FlexLink, STP, RSTP, MSTP, ERPS, LACP, ACL, QoS Support 64K MAC address Support RIP、OSPF、BGP、ISIS and IPV6 Support ONU authentic

32*40G/100G Base-X QSFP28 Supports combining the processing power of multiple switches into a single logical device Stacking support simplifies the management process. Administrators only need to manage one logical device. High-density 100G fibre access  Provides superior high-bandwidth

Water-proof design with IP-65 Protection Level Integrated with flap-up splice cassette and adaptor holder All stainless metal plate and anti-rusting bolts, nuts Fiber bend radius control more than 40mm Suitable for the fusion splicer or mechanical splice 2Pcs of 1x8 Splitter can be installed as

-Designed to meet 150 N cable retention; -Designed to meet IP67; -Adapter footprint : 36mm x 36mm; -Bayonet style locking; -Duplex LC interconnect MM or SM; -No tools required; -Operating temperature : -40 to +70 degree;; -Mating durability min : 100 cycles.

▪ Long production history, more popular process, stable low tap performance, low insertion loss and polarisation related loss; ▪ High reliability, high directionality, high operating temperature; ▪ Single or double window, and triple window according to customer needs; ▪ D

Compliant with QSFP-DD/QSFP28 MSA Standard Compliant with IEEE 802.3bj (100GBASE-CR4) Standard Compliant with IEEE 802.3by (25 Ethernet) Standard Data Rate:28G NRZ Per Channel Total Bandwidth 100 Gbps (4 Lane 28G NRZ) Low Power Consumption Management Interface follows SFF-8636 Standard and can

Adopt snap type opening method, easy to open. There are two 20mm cable inlet ports at the back, and equipped with cable protection rubber ring, fiber optic cable compression and reinforcement core fixing device. High-quality cold-rolled steel molding Electrostatic spraying is even and flat Compl

Adopt high-quality photoelectric integrated module to provide good Fiber and electrical characteristics Ensure reliable data transmission, long working span life Support full-duplex or half-duplex mode, with auto-negotiation capability The network port supports automatic cross recognition Built-

Provide four 2.5G/1Gbps/100M/10M adaptive RJ45 ports and one 10GbE SFP+ optical ports, all of which support wire-speed forwarding; Optical ports are backward compatible with 1G 4 RJ45 ports support POE function optional Each port supports MDI/MDIX auto-flip and duplex/rate self-negotiation Suppo

● Support 10/100/1000Mbps Ethernet interface; ● 1 in/2 out standard PoE port, maximum input power 90W, maximum PoE output power 81W. ● Standard PoE power supply with transmission distance up to 100m; ● PoE output port can automatically detect the connected devices and automatically negotiate the