● Up to 11.1Gb/s data links ● Up to 80Km transmission on SMF ● 1270nm/1490nm DFB Laser and APD receiver 1330nm/1550nm DFB Laser and APD receiver ● EEPROM with serial ID Functionality ● 2-wire interface with integrated Digital Diagnostic monitoring ● Hot-pluggable SFP+ footprint ● Specifi

Hot-pluggable SFP28 form factor Full-duplex transceiver module 1310nm DFB laser and PIN photo-detector Compliant with SFP28 MSA and IEEE 802.3cc 25GBASE-LR Data rate up to 25.78125Gbps Reach up to 10km over SMF Power consumption < 1.5W Dual LC receptacles Operating case temperature

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Compliant with QSFP MSA, IEEE 802.3ba 40GBASE-SR4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 300m (OM3) or 400m (OM4) over MMF Power consumption < 1.5W MPO12 rece

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x 1310nm DFB lasers and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Supports CDR bypass Compliant with QSFP28 MSA and 100G PSM4 MSA Data rate up to 103.125Gbps Reach up to

Hot-pluggable SFP+ Footprint Compact RJ-45 interface Compliant with SFP+MSA Support 10GBASE-T Operation in Host Systems and auto-negotiation to lower speed. Support 30m/80m transmission distance Fully Metallic Enclosure for Low EMI Single +3.3V power supply Power consumption<2.4W Operating

Supports up to 25.78Gbps bit rates Hot-pluggable SFP+ footprint 850nm VCSEL laser and PIN photodiode 300m over 50/125 um OM4 200m over 50/125um OM3 Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monit

Supports 850Gbps Single 3.3V Power Supply Power dissipation < 15W 8x53.125GBd (PAM4) Electrical Interface MPO-16 Connector APC Case Temperature Range: 0°C to 70°C VCSEL Transmitter PIN and TIA Array on the Receiver Side I2C Interface with Integrated Digital Diagnostic Monitoring Safety Cert

Supports 206.25Gb/s(8x NRZ 25.78125Gbps) aggregate bit rate Reach up to 70m (OM3) or 100m (OM4) over MMF 8x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Single MPO-16 receptacle Compliant with QSFP-DD MSA, IEEE 802.3bm 100GBASE-S

Hot-pluggable QSFP-DD form factor Supports 103.1 Gb/s aggregate bit rates Power dissipation < 8W RoHS-6 compliant (lead-free) Commercial case temperature range 0°C to 70°C Single 3.3V power supply Maximum link length of 100m on multimode Fiber (MMF) with FEC MPO receptacles I2C management in

•Supports 11.3Gb/s bit rates •Duplex LC connector •Hot pluggable SFP+ footprint •Uncooled 1310nm/1550 DFB/APD transmitter, PIN photo-detector •Applicable for 10~100km SMF connection •Low power consumption, < 1W •Digital Diagnostic Monitor Interface

MSA SFF-8431 compliant Supports serials data rates up to 10Gbps Hot pluggable High cost effective to Fiber optics solution Low power consumption Enhanced EMI suppression Differential impedance 100ohm

Data-rate of 1.25Gbps operation Class 1 laser product EN 60825-1 standards Compliant with SFP MSA and SFF-8472 with duplex or Simplex LC receptacle SC receptacle available for Bidi Digital Diagnostic Monitoring:Internal Calibration or External Calibration Tranmission distance: 550m~160km Compa