Compliant to Ethernet 100GBASE QSFP28 MSA compliant Supports 103.1Gb/s aggregate bit rate Transmitter: cooled 4x25Gb/s LAN WDM EML TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) Receiver: 4x25Gb/s APD ROSA Up to 80km transmission on single mode fiber Link Distance with G.652 Duplex LC optical rece

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x uncooled CWDM DFB lasers with AAWG MUX High-sensitivity PIN-TIA with AAWG DEMUX Compliant with QSFP MSA, IEEE 802.3ba 40GBASE-LR4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 10km over SMF Power consumpt

One Fiber Bi-Di SFP28 Optical Transceiver, WDM SFP28 Up to 25 Gbps Bi-directional Data Links Build-in CDR Fully Compliant with SFP+ MSA SFF-8472 Digital Diagnostic Function Simplex LC Connector 1270/1330 for 10km, 20km, 1270/1310 for 30km, 40km, 1295/1309 for 80km Distance Up to 10km, 20km, 4

One Fiber Bi-Di SFP28 Optical Transceiver, WDM SFP28 Up to 25 Gbps Bi-directional Data Links Build-in CDR Fully Compliant with SFP+ MSA SFF-8472 Digital Diagnostic Function Simplex LC Connector 1270/1330 for 10km, 20km, 1270/1310 for 30km, 40km, 1295/1309 for 80km Distance Up to 10km, 20km, 4

QSFP56 conforms to the Small Form Factor SFF8665 4-Channel Full-Duplex Passive Copper Cable Transceiver Support data rates: 50Gb/s PAM4 (per channel) Maximum aggregate data rate: 200Gb/s (4 x 50Gb/s) IEEE 802.3bj 200GEBASE-CR4 Copper link length up to 3m Power Supply: +3.3V Low crosstalk I2C

Optical interface compliant to IEEE 802.3ae/OC192/STM-64 Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm or 1550nm DFB transmitter, PIN photo-detector Dual CDR with 8.5-11.3Gb/s Operating case temperature: 0 to 70 °C / -5oC to +75oC / -20oC to +85oC Low power consumption < 1W

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 1310nm DFB lasers and PIN photo-detector array Compliant with QSFP MSA, 40G Ethernet and OTN OTU3 Data rate up to 44.6Gbps Reach up to 10km over SMF Power consumption < 3.5W MPO12 receptacle Operating case temperatu

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x cooling LAN-WDM DFB transmitter and APD ROSA Internal CDR circuits on both receiver and transmitter channels Compliant with QSFP28 MSA, IEEE 802.3ba 100GBASE-ER4 Lite and OTN OTU4 Data rate up to 111.8Gbps Rea

Compliant with QSFP-DD/QSFP28 MSA Standard Compliant with IEEE 802.3bj (100GBASE-CR4) Standard Compliant with IEEE 802.3by (25 Ethernet) Standard Data Rate:28G NRZ Per Channel Total Bandwidth 100 Gbps (4 Lane 28G NRZ) Low Power Consumption Management Interface follows SFF-8636 Standard and can

Hot-pluggable SFP+ footprint 50GHz DWDM ITU-T Full C-band Tunability Support 9.95Gb/s to 11.3Gb/s bit rates 80km 50GHz DWDM laser 80km APD photo-diode receiver Single 3.3V power supply Power dissipation < 1.7W -5°C to +70°C Duplex LC fiber connectors 10GBASE-ZR/ZW SDH STM-64 ITU-T G.959.1

Asymmetric 10G-PON is specified as XG-PON1: 10 Gbit/s downstream and 2.5 Gbit/s upstream (nominal line rate of 9.95328 Gbit/s downstream and 2.48832 Gbit/s upstream). Symmetric 10G-PON is also proposed as XG-PON2 with 10 Gbit/s upstream, but would require burst-mode lasers on ONTs to deliver the up

Up to 25.78Gb/s data rate 1270nm DFB laser and PIN receiver 1330nm DFB laser and PIN receiver 2-wire interface with integrated Digital Diagnostic monitoring Up to 30km transmission on SMF BIDI LC optical connector Single +3.3V power supply RoHS-6 compliant and lead-free Compliant with SFF