The HT-PI102-90W is a Single-Port, 802.3bt Power over Ethernet Injector with a maximum of up to 90 watts of power output over Ethernet cables with internal power.

The HT-PI102-90W is an advanced Ultra PoE++ Injector designed to deliver up to 90W of power and high-speed Gigabit Ethernet data connectivity to a wide range of network devices. Ideal for use in environments where power outlets are limited, it simplifies installations by eliminating the need for separate power cables. This injector is particularly useful for powering high-demand devices like PTZ cameras, all-in-one PCs, and digital display systems, providing both power and data over a single Ethernet cable.

Highlights

Convert Non-PoE to PoE: Upgrade your network with a 30W/60W/90W/48V PoE+/poe++ injector, enabling PoE without replacing existing switches

1Gbps High-Speed Performance: Supports 10/100/1000Mbps speeds with protection against over voltage and short circuits

Long-Range Connectivity: Extend power and data up to 100m (328ft) using Cat5e/Cat6 cables for remote devices

Auto Detect the Required Power, Up to 90 W

Standard 802.3af/at/bt for Various Powered Devices

Plug-and-Play Setup: No software or configuration needed, perfect for IP cameras and access points

Technical specifications

• Technical Specifications :

  HT-PI102-90W

• 10M/100M/1G RJ45 copper ports :

  2

• PoE / PoE+ / PoE++ / UPoE+ ports :

  1 (90-watt)

• Power over Ethernet :

  *

• PoE Power Supply Type :

  1/2/4/5 (+), 3/6/7/8 (-)

• PoE Power Output :

  48V DC, 1900mA. max. 90 watts

• Performance Specification :

  *

• Forwarding modes :

  Forward

• 100M Copper Latency :

  8.312µs; 8.413µs; 8.454µs (64-byte; 1518-byte; 9216-byte frames)

• 1G Copper Latency :

  3.515µs; 3.546µs; 3.627µs (64-byte; 1518-byte; 9216-byte frames)

• IEEE Network Protocols :

  *

• Protocols :

  • IEEE 802.3 Ethernet • IEEE 802.3u 100BASE-T • IEEE 802.3ab 1000BASE-T • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX

• Monitoring :

  *

• LEDs :

  Yes

• Per port :

  Speed, Link, Activity; PoE

• Per device :

  Power

• Physical Specifications :

  *

• Dimensions (Width * Depth * Height) :

  65*149*34MM
  

• Weight :

  160g

• Max power :

  7W (worst case, all ports used, full PoE, line-rate traffic) (Watts)

• Fan :

  Fanless

• Environmental Specifications :

  *

• Operating Temperature :

  -20° to 50°C (-4° to 122°F)

• Operating Humidity :

  90% maximum relative humidity (RH), non-condensing

• Operating Altitude :

  10,000 ft (3,000 m) maximum

• Storage Temperature :

  –20° to 70°C (– 4° to 158°F)

• Storage Humidity (relative) :

  95% maximum relative humidity, non-condensing

• Storage Altitude :

  10,000 ft (3,000 m) maximum

• Electromagnetic Emissions and Immunity :

  *

• Certifications :

  CE mark, commercial； FCC Part 15 Class A, VCCI Class A； Class A EN 55022 (CISPR 22) Class A； Class A C-Tick； EN 55024； CCC； 47 CFR FCC Part 15, SubpartB, Class A ICES-003: 2016 Issue 6, Class A； ANSI C63.4:2014； IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013

• Safety :

  *

• Safety Certifications :

  CB mark, commercial； CSA certified (CSA 22.2 #950)； UL listed (UL 1950)/cUL IEC 950/EN 60950； EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 60950-1:2005； (ed.2)+A1:2009+A2:2013； AN/NZS 60950.1:2015； CCC (China Compulsory Certificate)

• Warranty and Support :

  *

• Hardware Limited Warranty :

  Limited Lifetime*

• Technical Support via Phone and Email* :

  Limited Lifetime*

• 24x7 Online Chat Technical Support :

  Limited Lifetime*

• Package Contents :

  *

• All models :

  Single port 90W Gigabit Ultra PoE++ Injector---1pc
• AC Power cord with C13 connector (localized to region of sale)---1pc ；
• Warranty card---1pc

• Business Type :

  Commercial

• Bandwidth :

  1G

FAQs
#How do you install a PoE injector?

You will need several devices: an IP camera, a PoE adapter, a standard network switch, and Cat5e, Cat6, or Cat6A Ethernet cables.

#Does a PoE injector have manageable ports?

The injector doesn’t have manageable ports. It directly supplies Power to PoE PD through a power source, providing plug-and-play functionality. If you need a management function, consider a PoE switch.

#Is it safe to use a PoE injector? Can it damage my equipment?

IEEE 802.3af/at/bt compliant PoE injectors won’t do damage to any equipment, even though the equipment is not designed for PoE applications.

POE injector

PoE injector 60W

PoE injector 30W

PoE injector adaptor

PoE injector 48V 30W

PoE injector 8port

PoE injector 24port