PLC splitter MINI module has excellent performance parameters The PLC splitter is insensitive to wavelength and has full-band signal transmission from 1260 to 1650 nm. The PLC splitter has lower channel uniformity, ensuring that each channel can be reach almost the same when distributing optical p

Low Insertion Loss High isolation Low Polarization Dependent Loss Compact design Wide operating wavelength range High reliability and high stability Telcordia GR-1209-CORE-2001 compliant Telcordia GR-1221-CORE-1999 compliant ITU-T G.694.2 compliant RoHS-6 compliant (lead free)

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

Adopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e

1. The fiber fixation and protection function: Fiber inlet, fixation, and protection device should be provided. The fibers will be protected from being damaged when they are let in and fixed in the frame through these devices. The metal parts of the cables are insulated from the machine. The metal

·Water-proof design with IP-65 Protection Level ·Integrated with splice cassette and cable management system ·Manage fiber in a reasonable fiber radius condition ·Easy to maintain and extend the capacity ·Fiber bend radius control more than 40mm ·Suitable for the fusion splice or mechanical spl

Fully modular design, full frontal operation, integrated fusion and wiring Large diameter coiling design keeps the bending radius of pigtails and patch cords above 40mm Integrated drawer type tray, which can be pulled out during operation and put back in when finished Suitable for ribbon and non-

100% factory tested assemblies with traceable test data，Low environmental sensitivity Low insertion loss，High return loss，Stricter than industry standards Good exchange ability and good durability，Stable optical properties Standard connector，Various connector option: LC、SC、FC、ST etc. Standard:

It can be installed on any vertical flat surface or on a 4x2’’ box embedded in wall; Light and compact Easy handling, no special tools needed; The fiber optic reserve is inside the product; Allows accommodation of 40mm or 60mm fusion splice protectors; Capacity to store 20cm of optical cord wit

High-precision mechanical dimensions, high reliability and stability Ceramic sleeve, snap lock plug design More uniform insertion and extraction forces Not oxidized in environments with high humidity or salts Complete isolation to prevent accidental damage to the main control system High reliab

1.Suitable for ordinary fiber and ribbon fiber. 2.Fully kitted with all parts for convenient operation. 3.Overlap structure in splicing tray for easy installation. 4.Fiber-bending radium guaranteed more than 40mm. 5.Easy to install and re-entry with a common can wrench. 6.Excellent Anti-removab

Tight sleeve optical fiber is used for easy stripping Tight fiber has good flame retardant performance The aramid reinforced elements make the optical cable have excellent tensile properties The external protection material has the advantages of corrosion resistance, water resistance, UV protecti