o Single-fiber, bi-directional, hot-swappable SFP with SC/UPC interface o Up to 2.5Gbps operating rate o 1490nm DFB-LD transmitter and 1310nm burst mode APD-TIA receiver o DDM support provides diagnostic testing for power, temperature, transmit and receive status, and lifetime. o Transmission di

Hot-pluggable SFP28 form factor Full-duplex transceiver module 850nm VCSEL and PIN photo-detector Compliant with SFP28 MSA and IEEE 802.3by 25GBASE-SR Data rate up to 25.78125Gbps Reach up to 70m (OM3) or 100m (OM4) over MMF Power consumption < 1W Dual LC receptacles Operating case

Hot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Compliant with QSFP MSA, IEEE 802.3ba 40GBASE-SR4 and OTN OTU3 Data rate up to 44.6Gbps Reach up to 100m (OM3) or 150m (OM4) over MMF Power consumption < 1.5W MPO12 rece

Hot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x 850nm VCSEL array and PIN photo-detector array Internal CDR circuits on both receiver and transmitter channels Supports CDR bypass Compliant with QSFP28 MSA, IEEE 802.3bm 100GBASE-SR4 and InfiniBand EDR Compli

• Hot-pluggable SFP form factor • support 1000Base-T • RJ45 connector • Up to 100m over Cat5e • Compliant with SFP MSA • 2-wire DDM interface • Power Supply :+3.3V • Commercial Temperature Range: 0~70°C • Industrial Temperature Range: -40

·Compatible IEEE 802.3ah 1000BASE-PX20++ Enhanced GEPON application ·Applied to EPON OLT for a Single Fiber Bi-directional EPON System ·SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472 ·Burst Digital Receiving Signal Strength Indication (RSSI) ·Single 3.3V power sup

Single fiber bi-directional data links asymmetric TX 1244Mbps/RX 2488Mbps GPON ONU application with GPON MAC function. SC/UPC receptacle SFP with GPON ONU MAC inside, "Plug-and-play"via auto-discovery and configuration 1310nm DFB burst mode transmitter, 1490nm APD-TIA continuous mode receiver 0 t