100% factory tested assemblies with traceable test data，Low environmental sensitivity Low insertion loss，High return loss，Stricter than industry standards Good exchange ability and good durability，Stable optical properties Standard connector，Various connector option: LC、SC、FC、ST etc. Standard:

* Support HDMI 1.4/HDCP1.4; * Support local loop-out ; * Support 120m long distance transmission： * Low power consumption, low temperature and high safety； * Both the TX and RX support 3.5MM left and right audio output； * Support IR control； * Support USB mouse and keyboard extension; * Suppo

※High-speed, long-distance network signal transmission. Transmission of pure data up to 1000 m at a maximum rate of 100 Mbps. ※High performance, no signal attenuation Network signals are transmitted without delay, and the device only converts the transmission medium of the network signal without

Up to 25.78125Gbps data rate Hot-pluggable SFP 20PIN footprint Improved Pluggable Form Factor(IPF)compliant for enhanced EMI/EMC performance Compatible to SFP28 MSA Compatible to SFF-8402 and SFF-8432 Temperature Range: 0~ 70 °C RoHS Compatible

- 1.25 Gbps transfer rate - CWDM DFB lasers and APD (or PIN) photodetectors - Compliant with SFP MSA and SFF-8472 with duplex LC socket - With digital diagnostic monitoring - Compliant with SONET OC-24-LR-1 - RoHS compliant - + 3.3V single power supply - Working temperature: 0°C~70°C

Layer 2 Features High performance Store and Forward architecture IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 9K jumbo frame supported in 10/100 or 1000Mbps duplex mode Automatic address learning and address aging Industrial Case and Installa

● Up to 11.1Gb/s data links ● Up to 80Km transmission on SMF ● 1270nm/1490nm DFB Laser and APD receiver 1330nm/1550nm DFB Laser and APD receiver ● EEPROM with serial ID Functionality ● 2-wire interface with integrated Digital Diagnostic monitoring ● Hot-pluggable SFP+ footprint ● Specifi

Asymmetric 10G-PON is specified as XG-PON1: 10 Gbit/s downstream and 2.5 Gbit/s upstream (nominal line rate of 9.95328 Gbit/s downstream and 2.48832 Gbit/s upstream). Symmetric 10G-PON is also proposed as XG-PON2 with 10 Gbit/s upstream, but would require burst-mode lasers on ONTs to deliver the up

1.Suitable for ordinary fiber and ribbon fiber. 2.Fully kitted with all parts for convenient operation. 3.Overlap structure in splicing tray for easy installation. 4.Fiber-bending radium guaranteed more than 40mm. 5.Easy to install and re-entry with a common can wrench. 6.Excellent Anti-removab

Tight sleeve optical fiber is used for easy stripping Tight fiber has good flame retardant performance The aramid reinforced elements make the optical cable have excellent tensile properties The Figure-8 structure sheath is easy to strip and use The external protection material has the advantage

PLC splitter MINI module has excellent performance parameters The PLC splitter is insensitive to wavelength and has full-band signal transmission from 1260 to 1650 nm. The PLC splitter has lower channel uniformity, ensuring that each channel can be reach almost the same when distributing optical p

Low Insertion Loss High isolation Low Polarization Dependent Loss Compact design Wide operating wavelength range High reliability and high stability Telcordia GR-1209-CORE-2001 compliant Telcordia GR-1221-CORE-1999 compliant ITU-T G.694.2 compliant RoHS-6 compliant (lead free)