Provide 24*10/100/1000Base-T RJ45 ports. Support 6KV surge protection for port and power supply. Support 56G switch fabric and 9K jumbo frame. Support 5 operating modes (Standard, SAG&LP, VLAN, LOCK, ISOL) Support powered by PoE (port 24) or AC power. Plug and play, 13-in housing, desktop&rack-
Description Parameter ApplicationAging resistance: good stability for heat, heat radiation, air, ozone, etc. Corrosion resistance: strong resistance to dilute acid, salt water, oxidant, aliphatic hydrocarbon, etc. Sealing technology: adopt the reusable sealing component to ensure the good airtight and waterproof performance. Mec
Description Parameter Application- Tightly-jacketed fiber for easy peel-off use - Good flame-retardant properties of tight-fit fibers - Aramid reinforcement for excellent tensile strength of optical cables - The outer protection material is corrosion-resistant, waterproof, UV-proof, flame-retardant and environment-friendly.
Description Parameter ApplicationLow Insertion Loss High isolation Low Polarization Dependent Loss Compact design Wide operating wavelength range High reliability and high stability Telcordia GR-1209-CORE-2001 compliant Telcordia GR-1221-CORE-1999 compliant ITU-T G.694.1 compliant RoHS-6 compliant (lead free)
Description Parameter ApplicationAdopt male-female structure, standard size, convenient and fast connection. High precision ceramic insert and sleeve are adopted to achieve high precision alignment of connector, so as to ensure long-term stable mechanical and optical properties. Good mechanical performance, can meet the working e
Description Parameter ApplicationUp to 25.78Gb/s data rate 1270nm DFB laser and PIN receiver 1330nm DFB laser and PIN receiver 2-wire interface with integrated Digital Diagnostic monitoring Up to 30km transmission on SMF BIDI LC optical connector Single +3.3V power supply RoHS-6 compliant and lead-free Compliant with SFF
Description Parameter ApplicationUp to 25.78Gb/s data rate 1270nm DFB laser and PIN receiver 1330nm DFB laser and PIN receiver 2-wire interface with integrated Digital Diagnostic monitoring Up to 10km transmission on SMF BIDI LC optical connector Single +3.3V power supply RoHS-6 compliant and lead-free Compliant with SF
Description Parameter ApplicationHot-pluggable QSFP+ form factor 4 channels full-duplex transceiver module 4x uncooled CWDM FP lasers with AAWG MUX High-sensitivity PIN-TIA with AAWG DEMUX Compliant with QSFP MSA and IEEE 802.3ba 40GBASE-LR4 Data rate up to 41.25Gbps Reach up to 10km over SMF Power consumption < 3.5W Duplex
Description Parameter ApplicationHot-pluggable QSFP28 form-factor 4 channels full-duplex transceiver module 4x cooled LAN-WDM DML transmitter and PIN ROSA Internal CDR circuits on both receiver and transmitter channels Compliant with QSFP28 MSA and IEEE 802.3ba 100GBASE-LR4 Data rate up to 103.125Gbps or 111.8Gbps Reach up to
Description Parameter ApplicationSupport resolutions up to 3840*2160@30Hz Supporting bidirectional Audio(Microphone) Support copy EDID Support RS232 transmission (baud rate 115200) Automatically adjust video compression rate to ensure smooth video stream High-speed ASIC technology ensures near-zero latency for remote images S
Description Parameter ApplicationSupply power to IP network surveillance cameras through Cat5 Ethernet cable (PoE) 2x10/100Mbps or 2*10/100/1000Mbps RJ45 ports, 1x high power PoE port, special for high-speed dome cameras Support network port, lightning-proof power input port (the secondary lightning protection) Compatible with I
Description Parameter ApplicationSupport POE Mode-A (12+/36-) Mode-B ((45+/78-) to provide 24.9k detection signal to PSE Dual-mode detection conforming to IEEE802.3af, adaptive 100Mbp Port Rate Through the design of two-stage lightning protection chip, at the same time avoid static induction, circuit isolation protection Plug a
Description Parameter Application