Introduction:
The HT3104I-MF1/SF1 series are 5-port Ethernet switches that provide an economical solution for your industrial Ethernet connection, support IEEE802.3/802.3u/802.3x. Dustproof and full close structure and the rigid IP30 case with LED indicators make the plug-and-play , it support redundant power inputs, configurable relay output alarm . HT3104I-MF1/SF1 switches are easy to use and reliable performance. These switches have been designed for harsh industrial environments
HT3104I-MF1/SF1 supports 4 TP ports and 1 fiber ports. TP(RJ45) ports support 10/100Base-T(X), Full/Half duplex mode, and auto MDI/MDI-X connection; 100BaseFX supports single-/multi-mode, SC/ST/FC connector for optional.
Features:
• Comply withIEEE802.3/ 802.3u/ 802.3x
• Support auto negotiation speed, Full/Half duplex mode, and auto send data control
• Support flow control
• Plug-and-play, auto MDI/MDI-X connection
• Store and Forward 100M
• Switching process type
• Broadcast storm protection
• With LED indicator for working status
• 12～48VDC power input , with dual power input
• Power failure alarm
• Operating temperature ranges from -40 to 75°C
• Industrial standard design, dustproof and close design IP30, rugged high-strength Aluminum alloy
case
• DIN-Rail and wall mounting installation
Specification:
|
Physical ports
|
|
|
RJ45 Ports
|
4x10/100Base-Tx
10/100BaseT(X) auto connection, Full /Half duplex or force work mode, and support MDI/MDI-X connection
|
|
Fiber Ports
|
1x100Base-Fx
Single-mode dual fiber:20, 40,60, 80, 120Km optional
Single-mode single fiber:20,40,60,80,100km optional
Multi-mode: 2,5Km,optional
Wavelength: 850nm, 1310 nm, 1550nm
Interface: SC/ST/FC connector, optional
|
|
Technology
|
|
|
Standard
|
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
|
|
Forwarding and Filtrate Rate
|
148810pps
|
|
Processing
|
Store and Forward switching
|
|
MAC Address table
|
2048
|
|
LED indicator
|
PW1,PW2: power supply indicator
Alm: Fault Indicator
FX: Fiber port data communication(Flash when data transmitting)
FXL: Fiber link indicator
P1,P2,P3,P4: TP port Link/Act indicator on RJ45 socket
|
|
Fault contact
|
|
|
Relay
|
Relay output to carry capacity of 1A at 24VDC
|
|
Power
|
|
|
Input Voltage
|
Dual DC inputs: 12~48VDC on 6-pin terminal block
|
|
Overload Current Protection
|
Yes
|
|
Connection
|
3-bit terminal block terminal
|
|
Power Consumption (Typ.)
|
5W
|
|
Mechanical
|
|
|
Dimensions (W x D x H)
|
94X140X75mm
|
|
Weight (g)
|
800
|
|
Housing
|
IP 30 Protection, Aluminum alloy
|
|
Environmental
|
|
|
Operating Temperature
|
-40 to 75°C
|
|
Storage Temperature
|
-45 to 85 °C
|
|
Relative Humidity
|
10% to 95% (non-condensing)
|
|
Approvals
|
|
|
EMI
|
FCC Part 15, CISPR (EN55022) class A
|
|
EMS
|
EN61000-4-2(ESD),
EN61000-4-3(RS),
EN61000-4-4(EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
|
|
Shock:
|
IEC 60068-2-27
Free Fall: IEC 60068-2-32
|
|
Vibration
|
IEC 60068-2-6
|
|
Warranty
|
5 years
|
|
Approvals
|
FCC,CE, RoHS approvals
|
Ordering information
|
HT3104I-MF1-M02
|
Industrial 4x10/100Base-Tx to 100Base-Fx MM 850nm or 1310nm,2km SC(ST/FC) connector
|
|
HT3104I-SF1-XX
|
Industrial 4x10/100Base-Tx to 100Base-Fx SM Dual Fiber 1310/1550nm, SC(ST/FC) connector, 20/40/6080/100/120km
|
|
HT3104I-SF1-13XXB
HT3104I-SF1-15XXB
|
Industrial 4x10/100Base-Tx to 100Base-Fx SM Single Fiber 1310/1550nm, SC(ST/FC) connector, 20/40/6080/100km
|
|