.jpg)
Introduction
HT102-OAM 10/100/1000M auto negotiation IEEE802.3ah OAM compliant copper to fiber Gigabit Ethernet solution, is the new generation media converter. It can be managed by the standalonebuilt-innetworkmanagementsystem(with console port in each media converter) or synthetically managed by chassis network management card (NMS card, which can be plugged in the 17slot of our HT100-2U-17 series chassis)
Themediaconvertercardmodulecanbepluggedinour1-slotchassisor17-slotchassis(2U,19”) and support hot swappable.
The fixed standalone type can be used in pairs or used with chassis media converter card module, to be managed by NMS card together.
Features
■Options for 10/100M, 10/100/1000M to meet any network requirement.
■Auto negotiation among 10Mb, 100Mb and 1000Mb.
■Full duplex and half-duplex mode.
■Single mode fiber of dual mode fiber optional as well as variety of optical connectors(SC/FC/LC) Digital diagnoses and alarm for remote power-off
■Remote network management and OAM function (Optional)
Technical specifications
|
Standards&Protocols
|
IEEE802.3x full duplex on 10BaseT, 100BaseTX,1000BaseT IEEE802.3-2002
IEEE802.3u 100BaseTX IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseX IEEE802.3ah-2004
IEEE 802.1d Spanning Tree
IEEE 802.1w
IEEE 802.1p Qos
IEEE 802.1q VALN TAG IEEE802.3X Flow control
|
|
Management port
|
1 console (RJ45)
|
|
Serialportconfiguration
|
9600bps/8bit/none parity/1 stop bit/none low control
|
|
Userport
|
10/100/1000BaseTX (RJ45), Full/Half duplex；
1000BaseFX(SFPmodule)
|
|
Fiberlink option
|
Dual fiber/single fiber (WDM)
|
|
Max frame size
|
1518 Bytes (100M)；9728 Bytes (1000M)
|
|
Transmission distance
|
Dual fiber: up to 100km
Single fiber: up to 80km
|
|
Bandwidthmanagement
|
Support bandwidth control by step of64Kbps (N*64K)
|
|
LLCF
|
Support Link loss carry forward (LLCF)
|
|
Q-in-Q
|
Q-in-Qfunctionality(addanotherouter9100tag)makes the customer packets tunneled and unmodified through the providers network by using a provider configured 802.1QVLANtags,alleviatingtheburdenofaggregation switch
|
|
IEEE802.3ah OAM
standard function
|
HT102-OAM series has two working modes: Master and Slave. Central Office device works at Master mode, and Customer Premise device at Slave mode. The OAM functions are originated by Master device.
|
|
Link monitoring
|
Report local events to remote device, including Critical Event (voltage and temperature abnormal) and Dying Gasp (power down).
|
|
OAM discovery
|
Check if remote device has implemented/enabled IEEE802.3ah OAM function, and negotiate with remote device
|
|
Working Temperature
|
-10℃~60℃
|
|
Working Humidity
|
RH: 5~95% non-condensing
|
|
Storage Temperature
|
-40℃~80℃
|
|
StorageHumidity
|
RH: 5~90% non-condensing
|
|
Powersupply
|
220V/AC; 110V/AC; -48VDC
|
|
Powerconsumption
|
≤5W(Standalone type or converter card with 1-slot chassis
≤4W(Media converter Card)
≤75W(17-slots chassis, full load)
|
|
Dimension
|
88（W）×25（H）×115（D）（mm）(card-type)
130（W）×34（H）×160（D）（mm）(standalone-type)
|
|
Weight
|
0.25KG (card-type);
0.8KG (standalone-type with SFP, built-in power)
|
Management GUI:
|